Anim8or Community

General Category => General Anim8or Forum => Topic started by: KyleSan on March 20, 2014, 10:15:44 am

Title: Cel Shading
Post by: KyleSan on March 20, 2014, 10:15:44 am

Good Afternoon Anim8ors

I was hoping to lend your wisdom once again.

I need some help with cel-shading. I poked around the internet for some answers. What I found was this: www.anim8or.com/smf/index.php?topic=1054.0

I tried both methods mentioned and here are the results:

Method 1:
Ambient: 0.1
Diffuse: 0.5
Specular: 0
Transp: 1
Brill: 0.1
Rough: Blank

It looks just like normal shading to me. (See attached Image 1)

Method 2:
Ambient: 1
Diffuse: 1000
Spec: 0.5
Emmissive: 0
Rough: 0.1
Brill: 1
Transp: 1

This most definitely does the job but also wrecks any textures I've applied to the model. (See attached Image 2).

The textures applied to the models are ones I've made myself and not the plain colours from the default colour pallet. Could this have something to do with it?

Thanks for the insight

EDIT: my bad, added the pictures. Amateur mistake

Title: Re: Cel Shading
Post by: Raxx on March 20, 2014, 01:23:26 pm

Hi KyleSan, I don't see any attached images.

Title: Re: Cel Shading
Post by: KyleSan on March 23, 2014, 09:55:27 am

Added the pictures! Sorry about that

Title: Re: Cel Shading
Post by: ianross on March 25, 2014, 06:24:17 am

Hi KyleSan, I assume you are attempting to produce 2d rendered image/animation. I use flat shading sometimes adding textures i.e Ambient 1.1 , Diffuse 0.09 everything else =0
Watch my youtube film, let me know if you need any help