Anim8or Community

General Category => General Anim8or Forum => Topic started by: animation-nation on October 13, 2008, 11:55:52 am

Title: Can anybody help me design a room?
Post by: animation-nation on October 13, 2008, 11:55:52 am
I'm trying to build a room with two doors and two windows like the pictures here.

http://s530.photobucket.com/albums/dd341/SPD_Blue/?action=view&current=doors.jpg
The two doors on a separate wall.

http://s530.photobucket.com/albums/dd341/SPD_Blue/?action=view&current=walls.jpg
Just a corner, and note the white wall under the wallpaper.

http://s530.photobucket.com/albums/dd341/SPD_Blue/?action=view&current=window.jpg
Window. I couldn't get a shot of the other window at the other wall but that's the best shot I could get.

http://s530.photobucket.com/albums/dd341/SPD_Blue/?action=view&current=clouds.jpg
And that;s the wallpaper I want to apply to the room.

I just want to build a replica of that room. Can anybody show me how? I'd well appreciate it.
Title: Re: Can anybody help me design a room?
Post by: 3D Joe Wiltshire on October 13, 2008, 01:13:50 pm
Toy story eh?
Well there are quite a few skills you may wish to practice before creating this, since it can't really be placed into one  category
Title: Re: Can anybody help me design a room?
Post by: lynn22 on October 13, 2008, 01:36:10 pm
As Joe said you'll need to be familiar with Anim8or's possibilities but here is an example of the structure of a room to get you going.
I'ts not Toy Story but you get the idea  ;)
Title: Re: Can anybody help me design a room?
Post by: Lewb001 on December 22, 2008, 03:11:39 pm
well if you know how to draw i perspective, you could draw an image in 2d the make it 3d (im not sure what the word is)
hope this helped

Lewb001
Title: Re: Can anybody help me design a room?
Post by: floyd86 on December 22, 2008, 03:30:34 pm
I made a room like that ones for a contest (image 1). I pretty simple: take a plane and make one wall using edge loops (image 2).
Then copy those walls 4 times to create a room by connecting them. Cut holes for the door and windows using the knife tool. Model a simple frame for the windows and door (image 3) and place them in the holes.
After that you can add many details like doorknobs, hinges etc.
Title: Re: Can anybody help me design a room?
Post by: Lewb001 on December 22, 2008, 04:33:48 pm
I made a room like that ones for a contest (image 1). I pretty simple: take a plane and make one wall using edge loops (image 2).
Then copy those walls 4 times to create a room by connecting them. Cut holes for the door and windows using the knife tool. Model a simple frame for the windows and door (image 3) and place them in the holes.
After that you can add many details like doorknobs, hinges etc.
hey floyd86 i would like to thank you, you seem to reply to every questin with in about 30 mins with a correct and helpful answer, thank you.

Have a nice christmas.

Lewb001
Title: Re: Can anybody help me design a room?
Post by: floyd86 on December 22, 2008, 05:11:10 pm
hey floyd86 i would like to thank you, you seem to reply to every questin with in about 30 mins with a correct and helpful answer, thank you.

Have a nice christmas.

Lewb001

no problem, i like to help and i have nothing better to do while my things are rendering ^^
merry christmas to you too